Bright Water Filters

Bright Water Filters: under-sink filtration for UK homes

Bright Water Filters is a UK supplier of under-sink water purification systems, filtered-water taps and replacement filter cartridges. The company presents its range as a practical alternative to bottled water for everyday household use, with products designed to fit an existing tap and to be installed without a plumber. Its catalogue is aimed at homes, and the company states an intention to extend its range to businesses as it grows.

The V-3E system and its five filtration stages

The core product is the V-3E under-sink water filter, offered as a system with a tap or bundled with a three-way tap in brushed chrome or black, or with a magnetic pull-out tap. According to the product information, water passes through five stages across three snap-in cartridges before reaching the glass:

• A polypropylene sediment pre-filter for dirt, rust, sand and large particles.
• Carbon block stages that reduce chlorine, taste, odour and volatile organic compounds.
• A limescale reduction stage intended to protect taps and appliances.
• A fine polishing filter for a crystal-clear finish.
• A mineral retention stage intended to keep water tasting good.

The site describes the system as using a 0.01-micron ultrafiltration membrane, delivering filtered water at a rate of two litres per minute and running on mains pressure alone, with no electricity required. It also states that the filtration removes microplastics, bacteria, viruses, heavy metals, residual fluoride, pesticides and PFAs while retaining essential minerals and preventing limescale buildup. The company frames the result as comparable to reverse osmosis without what it calls the trade-offs of that method.

Taps, cartridges and accessories

Beyond complete systems, the range includes separate filtered-water taps, among them three-way pull-out models with a 360-degree swivel in brushed chrome or black, and a magnetic three-way tap in stainless steel with a pull-out nozzle. The taps are described as WRAS approved and capable of spraying both hot and cold water. Replacement cartridges are sold in packs combining polypropylene, carbon and ultrafiltration elements, as well as a single coconut activated carbon filter. The accessories line covers tape, connectors and PVC pipe components for plumbing connections.

Installation and support

The company states that its systems fit an existing tap and that no plumber is required, supplying step-by-step instructions and all fittings. Orders are described as dispatched within 48 hours on a tracked service, and the company offers phone and email support for product questions, installation guidance and maintenance enquiries. It names PHD24 as its installation partner. The filters are described as NSF, CE and FC certified, and the company says the products are designed and supported in the UK, with dispatch from London.

How the company positions its products

Bright Water Filters presents its systems against bottled water, arguing that they remove chlorine, sediment and microplastics while bottled water does so only to a limited extent, retain natural minerals, provide unlimited water without bottles to buy or carry, avoid single-use plastic waste and cost little per litre. The company also cites figures of 1,500 plastic bottles avoided per family each year and zero kilowatt-hours of electricity consumed. These are the company's own comparisons and claims rather than independent findings.

Product range and purchasing information

The catalogue lists the V-3E system with tap at £169, the three-way tap versions at £219 in black and £239 in brushed chrome, and the magnetic pull-out tap version at £259. Standalone taps range from £79 to £129, and replacement cartridge packs from £22.99 for a single carbon filter to £80 for a five-pack. The site indicated free shipping on orders over £20 and a 10% discount with the code OCTOBER10, valid until 31 October. Prices are shown in pounds sterling and include tax, with shipping calculated at checkout.